GoZync4

Version History

GoZync4.VersionHistory History

Hide minor edits - Show changes to output

November 11, 2014, at 07:27 PM by 98.245.117.26 -
Changed line 103 from:
'''Build 4.04''' (August 6, 2012). This build adds a few things for folks who are syncing to multiple hosted files or who has more than one local (mobile) file but may only distribute some mobile files to some users. The net effect here is that at sync-time 4.04 now only tests the Table Occurrences being synced instead of testing your whole config.
to:
'''Build 4.04''' (August 6, 2013). This build adds a few things for folks who are syncing to multiple hosted files or who has more than one local (mobile) file but may only distribute some mobile files to some users. The net effect here is that at sync-time 4.04 now only tests the Table Occurrences being synced instead of testing your whole config.
May 20, 2014, at 05:54 PM by 50.132.85.96 -
Changed line 7 from:
'''Build 4.058''' (March 18, 2014) This build fixes a bug we had in the demo's date math. If you're going to demo ProZync please [[http://www.seedcode.com/downloads | download]] a fresh copy of GoZync and use the GoZyncLicense.fmp12 file from the new copy (that's the only file changed in 4.057).
to:
'''Build 4.058''' (March 18, 2014) This build fixes a bug we had in the demo's date math. If you're going to demo ProZync please [[http://www.seedcode.com/downloads | download]] a fresh copy of GoZync and use the GoZyncLicense.fmp12 file from the new copy (that's the only file changed in 4.057 and 4.058).
May 20, 2014, at 05:53 PM by 50.132.85.96 -
May 20, 2014, at 05:53 PM by 50.132.85.96 -
Changed line 7 from:
'''Build 4.057''' (March 18, 2014) This build fixes a bug we had in the demo's date math. If you're going to demo ProZync please [[http://www.seedcode.com/downloads | download]] a fresh copy of GoZync and use the GoZyncLicense.fmp12 file from the new copy (that's the only file changed in 4.057).
to:
'''Build 4.058''' (March 18, 2014) This build fixes a bug we had in the demo's date math. If you're going to demo ProZync please [[http://www.seedcode.com/downloads | download]] a fresh copy of GoZync and use the GoZyncLicense.fmp12 file from the new copy (that's the only file changed in 4.057).
March 19, 2014, at 12:48 AM by 50.132.84.245 -
Changed lines 7-9 from:
'''Build 4.057''' (March 18, 2014) This build fixes a bug we had in the demo's date math. If you're going to demo ProZync please [[/downloads | download]] a fresh copy of GoZync and use the GoZyncLicense.fmp12 file from the new copy (that's the only file changed in 4.057).

'''Build 4.056''' (March 10, 2014) This build introduces the two-week ProZync demo; if your'e using LowZync and would like to take advantage of the demo, [[/downloads | download]] the latest version of GoZync and swap out the new GoZyncLicense.fmp12 file for the one you have. You'll see a switch to turn on the demo on the main screen of GoZyncLicense.
to:
'''Build 4.057''' (March 18, 2014) This build fixes a bug we had in the demo's date math. If you're going to demo ProZync please [[http://www.seedcode.com/downloads | download]] a fresh copy of GoZync and use the GoZyncLicense.fmp12 file from the new copy (that's the only file changed in 4.057).

'''Build 4.056''' (March 10, 2014) This build introduces the two-week ProZync demo; if your'e using LowZync and would like to take advantage of the demo, [[http://www.seedcode.com/downloads | download]] the latest version of GoZync and swap out the new GoZyncLicense.fmp12 file for the one you have. You'll see a switch to turn on the demo on the main screen of GoZyncLicense.
March 19, 2014, at 12:48 AM by 50.132.84.245 -
Added line 8:
March 19, 2014, at 12:48 AM by 50.132.84.245 -
Added line 7:
'''Build 4.057''' (March 18, 2014) This build fixes a bug we had in the demo's date math. If you're going to demo ProZync please [[/downloads | download]] a fresh copy of GoZync and use the GoZyncLicense.fmp12 file from the new copy (that's the only file changed in 4.057).
March 10, 2014, at 05:25 PM by 174.21.48.56 -
Added lines 8-9:

The other change we made improved the logging around validation errors. This is an easy mod to make in your file and you'll find %newwin% [[http://seedcode.com/support/viewtopic.php?f=38&t=4026 | instructions here]].
March 10, 2014, at 05:16 PM by 174.21.48.56 -
Added lines 6-7:

'''Build 4.056''' (March 10, 2014) This build introduces the two-week ProZync demo; if your'e using LowZync and would like to take advantage of the demo, [[/downloads | download]] the latest version of GoZync and swap out the new GoZyncLicense.fmp12 file for the one you have. You'll see a switch to turn on the demo on the main screen of GoZyncLicense.
February 11, 2014, at 01:31 AM by 75.151.125.213 -
Added lines 6-11:

'''Build 4.054''' (February 10, 2014) We've made a few small mods to accommodate behavior changes in FM13 (though all this stuff works in 12 also). Aside from a bunch of conditional formatting changes mentioned [[http://www.seedcode.com/filemaker-13-hiding-objects/ | here]], we did two things:

-> In QuickContact, add a "Refresh Window" script step as the first line of the script "GotoLayout (layoutName)" - the "soft" reference to layout name by variable at the end of the script won't resolve the window in Go13 without a refresh.

-> In GoZyncHosted we need to add a little more time for our mobile files to close when we're delivering a new version. It's a simple mod and instructions are [[http://www.seedcode.com/support/viewtopic.php?f=38&t=4017 | here]].
October 07, 2013, at 01:42 PM by 50.132.84.245 -
Changed lines 9-10 from:
->Better messaging of syncs where there are no changes since the last sync; hardened our test all configs script; added scripts to make it easier to sync some--but not all--records edited on the mobile device; updated a couple error dialogs to use the correct field name; improved the way we test your script edits around related records; and updated to the latest (fastest) version of hyper list.
to:
->Better messaging of syncs where there are no changes since the last sync; hardened our test all configs script; added scripts to make it easier to sync some--but not all--records edited on the mobile device; updated a couple error dialogs to use the correct field name; and improved the way we test your script edits around related records.
Deleted line 22:
Get Values in Found Set ( FieldName )
October 07, 2013, at 12:15 AM by 50.132.84.245 -
Changed line 11 from:
[[http://www.seedcode.com/gzdownloads/GoZync_4.053_1.zip | Download 4.053]]  and copy the complete script steps from these scripts, replacing the all the script steps in your copy. Note that these are not scripts you've edited as part of your configuration of GoZync:
to:
[[http://www.seedcode.com/gzdownloads/GoZync_4.053_1.zip | Download 4.053]]  and copy the complete script steps from the following scripts, replacing the ''all'' the script steps in your version of each script. Note that these are not scripts you've edited as part of your configuration of GoZync:
October 07, 2013, at 12:13 AM by 50.132.84.245 -
Changed lines 7-10 from:


'''Build 4.052''' (August 28, 2013) finishes two things from 4.051 =) We recommend this for everyone using GoZync 4.051. There are just two scripts to change here. [[http://www.seedcode.com/gzdownloads/GoZync_4.052.zip | Download 4.052]]  and copy the script steps from these two scripts, replacing the script steps in your copy:
to:
'''Build 4.053''' (October 6, 2013) This version makes a number of refinements we recommend for all users. We added...

->Better messaging of syncs where there are no changes since the last sync; hardened our test all configs
script; added scripts to make it easier to sync some--but not all--records edited on the mobile device; updated a couple error dialogs to use the correct field name; improved the way we test your script edits around related records; and updated to the latest (fastest) version of hyper list.

[[http
://www.seedcode.com/gzdownloads/GoZync_4.053_1.zip | Download 4.053]]  and copy the complete script steps from these scripts, replacing the all the script steps in your copy. Note that these are not scripts you've edited as part of your configuration of GoZync:

-> In GoZyncHosted
--> Test All Configs \\
Test Config - Fields ( TOName )

-> In GoZyncMobile
-->  Pull Selected TO \\
Push Selected TO \\
Delete Records Not In This List (  $IDsToKeep  ) \\
Check GTRR Script \\
The script named "  --> Then Run This...Test "Setup Go To Related Records (TOName)" Script" \\
Get Values in Found Set ( FieldName )

----
October 06, 2013, at 11:02 PM by 50.132.84.245 -
Changed lines 7-25 from:
'''Build 4.053''' (October 6, 2013) This version makes a number of refinements we recommend for all users. We added...

->Better messaging of syncs where there are no changes since the last sync; hardened our test all configs
script; added scripts to make it easier to sync some--but not all--records edited on the mobile device; updated a couple error dialogs to use the correct field name; improved the way we test your script edits around related records; and updated to the latest (fastest) version of hyper list.

[[http
://www.seedcode.com/gzdownloads/GoZync_4.053.zip | Download 4.053]]  and copy the complete script steps from these scripts, replacing the all the script steps in your copy. Note that these are not scripts you've edited as part of your configuration of GoZync:

-> In GoZyncHosted
--> Test All Configs \\
Test Config - Fields ( TOName )

-> In GoZyncMobile
-->  Pull Selected TO \\
Push Selected TO \\
Delete Records Not In This List (  $IDsToKeep  ) \\
Check GTRR Script \\
The script named "  --> Then Run This...Test "Setup Go To Related Records (TOName)" Script" \\
Get Values in Found Set ( FieldName )

----
to:


'''Build 4.052''' (August 28, 2013) finishes two things from 4.051 =) We recommend this for everyone using GoZync 4.051. There are just two scripts to change here. [[http://www.seedcode.com/gzdownloads/GoZync_4.052.zip | Download 4.052]]  and copy the script steps from these two scripts, replacing the script steps in your copy:
October 06, 2013, at 09:14 PM by 50.132.84.245 -
Changed line 11 from:
[[http://www.seedcode.com/gzdownloads/GoZync_4.053.zip | Download 4.053]]  and copy the complete script steps from these scripts, replacing the all the script steps in your copy:
to:
[[http://www.seedcode.com/gzdownloads/GoZync_4.053.zip | Download 4.053]]  and copy the complete script steps from these scripts, replacing the all the script steps in your copy. Note that these are not scripts you've edited as part of your configuration of GoZync:
October 06, 2013, at 09:13 PM by 50.132.84.245 -
Changed line 9 from:
Better messaging of syncs where there are no changes since the last sync; hardened our test all configs script; added scripts to make it easier to sync some--but not all--records edited on the mobile device; updated a couple error dialogs to use the correct field name; improved the way we test your script edits around related records; and updated to the latest (fastest) version of hyper list.
to:
->Better messaging of syncs where there are no changes since the last sync; hardened our test all configs script; added scripts to make it easier to sync some--but not all--records edited on the mobile device; updated a couple error dialogs to use the correct field name; improved the way we test your script edits around related records; and updated to the latest (fastest) version of hyper list.
October 06, 2013, at 09:12 PM by 50.132.84.245 -
Changed line 23 from:
Get Values in Found Set ( FieldName ) \\
to:
Get Values in Found Set ( FieldName )
October 06, 2013, at 09:12 PM by 50.132.84.245 -
Added lines 6-25:

'''Build 4.053''' (October 6, 2013) This version makes a number of refinements we recommend for all users. We added...

Better messaging of syncs where there are no changes since the last sync; hardened our test all configs script; added scripts to make it easier to sync some--but not all--records edited on the mobile device; updated a couple error dialogs to use the correct field name; improved the way we test your script edits around related records; and updated to the latest (fastest) version of hyper list.

[[http://www.seedcode.com/gzdownloads/GoZync_4.053.zip | Download 4.053]]  and copy the complete script steps from these scripts, replacing the all the script steps in your copy:

-> In GoZyncHosted
--> Test All Configs \\
Test Config - Fields ( TOName )

-> In GoZyncMobile
-->  Pull Selected TO \\
Push Selected TO \\
Delete Records Not In This List (  $IDsToKeep  ) \\
Check GTRR Script \\
The script named "  --> Then Run This...Test "Setup Go To Related Records (TOName)" Script" \\
Get Values in Found Set ( FieldName ) \\

----
September 23, 2013, at 11:53 PM by 98.203.211.206 -
Changed lines 61-62 from:
Get Current Build Number For File ( FileName)
to:
Get Current Build Number For File ( FileName) \\
Pull MetaData and Settings down from Host
August 29, 2013, at 03:36 AM by 50.132.84.245 -
Changed lines 7-8 from:
'''Build 4.052''' (August 28, 2013) finishes two things from 4.051 =) We recommend this for everyone using GoZync 4.051. There are just two scripts to change here. Download 4.052 and copy the script steps from these two scripts, replacing the script steps in your copy:
to:
'''Build 4.052''' (August 28, 2013) finishes two things from 4.051 =) We recommend this for everyone using GoZync 4.051. There are just two scripts to change here. [[http://www.seedcode.com/gzdownloads/GoZync_4.052.zip | Download 4.052]] and copy the script steps from these two scripts, replacing the script steps in your copy:
Changed lines 19-20 from:
Download 4.051 as the reference from which to copy these changes.
to:
[[http://www.seedcode.com/gzdownloads/GoZync_4.051.zip | Download 4.051]] as the reference from which to copy these changes.
Changed line 75 from:
To make these changes in your copy of build 4.03 [[http://www.seedcode.com/downloads/ | download 4.04]] and then replace the steps inside the following scripts with the contents of the 4.04 versions of these scripts:
to:
To make these changes in your copy of build 4.03 [[http://www.seedcode.com/gzdownloads/GoZync_4.04.zip | download 4.04]] and then replace the steps inside the following scripts with the contents of the 4.04 versions of these scripts:
August 29, 2013, at 03:30 AM by 50.132.84.245 -
Added lines 7-16:
'''Build 4.052''' (August 28, 2013) finishes two things from 4.051 =) We recommend this for everyone using GoZync 4.051. There are just two scripts to change here. Download 4.052 and copy the script steps from these two scripts, replacing the script steps in your copy:

-> In GoZyncHosted
--> Test Config - Fields ( TOName )

-> In GoZyncMobile
-->  --  Get Filtered List Of IDs from Host

----

Added lines 18-19:

Download 4.051 as the reference from which to copy these changes.
August 28, 2013, at 06:15 PM by 71.212.127.69 -
Changed lines 48-49 from:
Check For Updates (File)
to:
Check For Updates (File) \\
Get Current Build Number For File ( FileName
)
Changed line 89 from:
Docs for versions before GoZync 4 can be found [[GoZync3.GoZync3 | here]].
to:
Docs for versions before GoZync 4 can be found [[GoZync3.GoZync3 | here]].
August 26, 2013, at 11:37 PM by 67.190.87.90 -
Changed line 41 from:
Please download GoZync 4.051 and replace the steps in the following scripts, with the script steps from their 4.051 counterparts. All the effected scripts are in GoZyncMobile.
to:
Please download GoZync 4.051 and replace the steps in the following scripts, with the script steps from their 4.051 counterparts. All the affected scripts are in GoZyncMobile.
August 26, 2013, at 11:03 PM by 50.132.84.245 -
Changed line 15 from:
%center% %newwin width=100px%  [[http://www.seedcode.com/rootimages/stikipad/gozync/QCscreen.png | http://www.seedcode.com/rootimages/stikipad/gozync/QCscreen.png]]
to:
%center% %newwin width=200px%  [[http://www.seedcode.com/rootimages/stikipad/gozync/QCscreen.png | http://www.seedcode.com/rootimages/stikipad/gozync/QCscreen.png]]
August 26, 2013, at 11:02 PM by 50.132.84.245 -
Changed line 15 from:
%newwin% %center width=200px% [[http://www.seedcode.com/rootimages/stikipad/gozync/QCscreen.png | http://www.seedcode.com/rootimages/stikipad/gozync/QCscreen.png]]
to:
%center% %newwin width=100px%  [[http://www.seedcode.com/rootimages/stikipad/gozync/QCscreen.png | http://www.seedcode.com/rootimages/stikipad/gozync/QCscreen.png]]
August 26, 2013, at 11:01 PM by 50.132.84.245 -
Changed line 15 from:
%newwin% %center width=200px% [http://www.seedcode.com/rootimages/stikipad/gozync/QCscreen.png | http://www.seedcode.com/rootimages/stikipad/gozync/QCscreen.png]]
to:
%newwin% %center width=200px% [[http://www.seedcode.com/rootimages/stikipad/gozync/QCscreen.png | http://www.seedcode.com/rootimages/stikipad/gozync/QCscreen.png]]
August 26, 2013, at 11:01 PM by 50.132.84.245 -
Added lines 14-15:

%newwin% %center width=200px% [http://www.seedcode.com/rootimages/stikipad/gozync/QCscreen.png | http://www.seedcode.com/rootimages/stikipad/gozync/QCscreen.png]]
August 26, 2013, at 10:47 PM by 50.132.84.245 -
Changed lines 11-16 from:
GoZync's sample files have long used a green "uploaded" indicator on the mobile side to show when a record has been pushed to the hosted files: when it had been zync'ed. In 4.051 we've enhanced that to show the last specific action applied to a mobile record. So now the possible states of a record are

"
Pushed"
"
Pulled"
"Round
Tripped"
and "Modified"
to:
GoZync's sample files have long used a green "uploaded" indicator on the mobile side to show when a record has been pushed to the hosted files: when it had been zync'ed. In 4.051 we've enhanced that to show the last specific action applied to a mobile record. So now the possible states of a record are:

->
Pushed, Pulled, Round Tripped, and Modified
August 26, 2013, at 10:46 PM by 50.132.84.245 -
Added lines 7-58:
'''Build 4.051''' (August 28, 2013) fixes a number of small bugs and a couple big ones around closing files and downloading new versions. We recommend this for everyone using GoZync 4.04. If you have an earlier version of GoZync, please find your version below and follow the upgrade instructions to 4.04 before moving to 4.051

'''Changing Fields (required).'''

GoZync's sample files have long used a green "uploaded" indicator on the mobile side to show when a record has been pushed to the hosted files: when it had been zync'ed. In 4.051 we've enhanced that to show the last specific action applied to a mobile record. So now the possible states of a record are

"Pushed"
"Pulled"
"Round Tripped"
and "Modified"

We're still recording the timestamp of this event in the record so you can give your users displays like "Pulled Monday, Aug 26 2013."

In order to make this change in your copy you'll need to change two of the "gz_…" fields you added to your mobile files. In fact, you *must* change these two fields if you want to take advantage of GoZync 4.051 or higher.

Fortunately these changes are easy to make.

In table in each of your mobile files, please:

-> a) rename the field "gz_TimeStampSent" to "gz_TimeStampZynced"

-> b) change the field "gz_Sent" to a text field

-> c)  rename it "gz_LatestAction".

-> d) give "gz_LatestAction" the following auto enter definition: Case( gz_Send = 1 ; "Modified" ; Self ). This is much simpler than the calc we used to use there.

-> e) make sure "do not replace existing value of fed" is OFF in field options; this is how you should have fond the field set up.

Once you're done the conditional formatting you may have been using on "uploaded" won't work any more. To replace this add the gz_LatestAction field to any layout where you'd like to see the sync result. Consider using the conditional formatting we're using on QuickContact's  "List-iPhone" layout as an example.

To show the date or time of this last action, consider pairing it with the TimeStampZynced field like this: <<gz_LatestAction>>: <<gz_TimeStampZynced>>

'''Changing Scripts (required).'''

Please download GoZync 4.051 and replace the steps in the following scripts, with the script steps from their 4.051 counterparts. All the effected scripts are in GoZyncMobile.

->  --> Then Run This...Test "Setup Go To Related Records (TOName)" \\
Script \\
Zync It - Public API - ( TOName ) { Action ; RecordID } \\
Finish Sync \\
Zengine ( IDsToSync ) \\
Check For Updates (File)

'''New License File (required).'''

Please download GoZync 4.051and use the new license file there instead of the one you currently have. You'll need to re-enter your license codes: we're very sorry for the inconvenience. If you cam find your license codes, let us know and we'll resend them.

That's it. Don't forget to increment the GoZyncCodeBase field in GoZyncMobile to 4.051

----

Added lines 75-76:
----
Added lines 79-80:
----
Added lines 83-84:
----
Added lines 86-87:

----
August 06, 2013, at 05:56 PM by 50.132.84.245 -
Added lines 8-9:

We also added a switch at the end of the script “Finish Sync” in GoZyncMobile that will now close the hosted files after sync. (Leaving them open is in many cases faster for subsequent syncs, but this switch brings back the GZ3 behavior.)
August 06, 2013, at 05:40 PM by 50.132.84.245 -
Changed lines 5-6 from:
!! What is the latest version of GoZync?
to:
!! What is the latest build of GoZync?
Changed line 9 from:
To make these changes in 4.03 [[http://www.seedcode.com/downloads/ | download 4.04]] and then replace the steps inside the following scripts with the contents of the 4.04 versions of these scripts:
to:
To make these changes in your copy of build 4.03 [[http://www.seedcode.com/downloads/ | download 4.04]] and then replace the steps inside the following scripts with the contents of the 4.04 versions of these scripts:
August 06, 2013, at 05:39 PM by 50.132.84.245 -
Changed line 9 from:
To make these changes in 4.03 [[/downloads/ | download 4.04]] and then replace the steps inside the following scripts with the contents of the 4.04 versions of these scripts:
to:
To make these changes in 4.03 [[http://www.seedcode.com/downloads/ | download 4.04]] and then replace the steps inside the following scripts with the contents of the 4.04 versions of these scripts:
August 06, 2013, at 05:38 PM by 50.132.84.245 -
Added lines 6-19:

'''Build 4.04''' (August 6, 2012). This build adds a few things for folks who are syncing to multiple hosted files or who has more than one local (mobile) file but may only distribute some mobile files to some users. The net effect here is that at sync-time 4.04 now only tests the Table Occurrences being synced instead of testing your whole config.

To make these changes in 4.03 [[/downloads/ | download 4.04]] and then replace the steps inside the following scripts with the contents of the 4.04 versions of these scripts:

-> In GoZyncHosted
--> On Last Window Close

-> In GoZyncMobile
--> Zync It - Public API - ( TOName ) { Action ; RecordID } \\
Start Sync \\
Check GTRR Script \\
Check Connection to Hosted And Local Files \\
Finish Sync
July 24, 2013, at 09:23 PM by 50.132.84.245 -
Changed line 7 from:
'''Build 4.03''' (July 24, 2012). A minor repair to one of the "pull" scripts. To make this change in your copy please add the two lines %newwin% [[http://www.seedcode.com/rootimages.stikipad/gozync/Edit_Script__Get_IDs_to_Pull_From_Host__Delete_Records_On_Mobile_That_Have_Been_Filtered_Out____GoZyncMobile__.png | shown here]] to the script ""Get IDs to Pull From Host, Delete Records On Mobile That Have Been Filtered Out" (whew; long name) in GoZyncMobile.
to:
'''Build 4.03''' (July 24, 2012). A minor repair to one of the "pull" scripts. To make this change in your copy please add the two lines %newwin% [[http://www.seedcode.com/rootimages/stikipad/gozync/Edit_Script__Get_IDs_to_Pull_From_Host__Delete_Records_On_Mobile_That_Have_Been_Filtered_Out____GoZyncMobile__.png | shown here]] to the script ""Get IDs to Pull From Host, Delete Records On Mobile That Have Been Filtered Out" (whew; long name) in GoZyncMobile.
July 24, 2013, at 09:22 PM by 50.132.84.245 -
Changed lines 7-11 from:
'''Build 4.005''' (July 1, 2012). Our first public build of the new GoZync 4 version.
to:
'''Build 4.03''' (July 24, 2012). A minor repair to one of the "pull" scripts. To make this change in your copy please add the two lines %newwin% [[http://www.seedcode.com/rootimages.stikipad/gozync/Edit_Script__Get_IDs_to_Pull_From_Host__Delete_Records_On_Mobile_That_Have_Been_Filtered_Out____GoZyncMobile__.png | shown here]] to the script ""Get IDs to Pull From Host, Delete Records On Mobile That Have Been Filtered Out" (whew; long name) in GoZyncMobile.

'''Build 4.02''' (July 1, 2012). A number of minor refinements to 4.005: this is our first shipping build. To move to 4.0x from any 3.x version please [[http://www.seedcode.com/downloads | download]] a copy of 4.0x and follow the [[MigratingFromGoZync3 | migration instructions here]].

'''Build 4.005''' (July 1, 2012). Our first bate
build of the new GoZync 4 version.
July 01, 2013, at 06:50 PM by 24.22.243.133 -
Changed lines 7-8 from:
'''Build 4.004''' (June 30, 2012). Our first public build of the new GoZync 4 version.
to:
'''Build 4.005''' (July 1, 2012). Our first public build of the new GoZync 4 version.
June 30, 2013, at 08:50 PM by 50.132.84.245 -
Changed lines 7-57 from:
The '''latest version''' of the GoZync framework is '''3.173''' (April 30, 2013). This build makes testing your integration a bit easier by aborting the pull of record IDs if you're unable to place attachments the inbox. There are only two scripts to replace so we recommend this for all users of 3.172, but it isn't a mod you need to deploy to your users right away.

To make these changes in your copy, %newwin% [[http://www.seedcode.com/downloads/files/GoZync4.173.zip | download]] 3.173 and then replace the contents of the following scripts in your files with the corresponding scripts in 3.173:

-> In GoZyncMobile: \\
Send Up Package \\
Disconnect From Server

'''Build 3.172''' (April 28, 2013). This build improves the speed of the pull, often ''dramatically''. We recommend this for all users of 3.171. To make these changes in your copy, %newwin% [[http://www.seedcode.com/downloads/files/GoZync4.172.zip | download]] 3.172 and then replace the contents of the following scripts in your files with the corresponding scripts in 3.172:

-> In GoZyncMobile: \\
Parse Package (Package) \\
Set Fields \\
Delete Records Not In The IDs List (IDs)

-> In GoZyncHosted: \\
Create Package FROM TO ( List( $TOName | LastZyncID | RecordID  ))

Then edit the field Interface::GoZyncCodeBase in GoZyncHosted and change the build number to 3.172. [[Distributing Mobile Files | Distribute]] new version of your mobile files and you're all done.

'''Build 3.171''' (February 27, 2013). We've added a number of refinements to make testing and logging easier and fixed a few edge case bugs. We recommend this for all users of 3.17 and instructions for applying these changes to your files can be found %newwin% [[http://www.seedcode.com/support/viewtopic.php?f=38&t=3818 | here]].

'''Build 3.17''' (December 18, 2012) This build adds one new feature to GoZync: it lets you pass up from mobile a set of name/value pairs that can be used when filtering records to pull down to your device. Previously we generally used the logged in Account Name in GoZyncHosted to know who was syncing and filter the found set for them accordingly. That still works great (and is very secure) if all you need to know is *who* is syncing.

This feature is more for situations when a user may get to select which records they want to sync. For example they may ask to see records from a date range, or appointments for a geographic region they may be visiting tomorrow. These criteria can now be easily passed up to GoZyncHosted and used in your modifications of the "Filter Records to Zync" script there. Instructions on how to take advantage of this are [[DownloadingFoundSets | here]].

We recommend this for all users of 3.16. Instructions for applying the changes to your file follow can be found %newwin% [[http://www.seedcode.com/support/viewtopic.php?f=38&t=3770 | here]].

'''Build 3.16''' (November 21, 2012). With this version we've made a lot of changes to speed up syncs, squashed a few integration bugs, and made the integration process a little more hardy. Changes in 3.16 can be applied to your build by following the instructions %newwin% [[http://www.seedcode.com/support/viewtopic.php?f=38&t=3746 | here]]. We recommend this update for all users of 3.14 even if you're already up and running.

'''Build 3.14''' (September 25, 2012). This build fixed three bugs you may have run into if you were syncing related tables:: a bug in GoZyncHosted where we sometimes failed to pickup foreign keys;  a problem where there would be errors if the layout and TO named didn't match; and an issue where we weren't getting related containers when FLM was off.

All three bugs are fixed by changing scripts in GoZyncHosted. Instructions for making the changes can be found %newwin% [[http://www.seedcode.com/support/viewtopic.php?f=38&t=3674 | here]].

'''Build 3.13''' (August 22, 2012). This build fixed another issue in the "Zync It - This File" API where we were using the first specified action for all tables in the file. To fix this in your copy, take a look at %newwin% [[http://www.seedcode.com/rootimages/stikipad/gozync/zyncit2.png | this screen shot]]. Edit that script in GoZyncMobile and add the first line shown in blue; then edit the second blue line to use the new variable name. That's it.

'''Build 3.12''' (August 13, 2012). This build fixed the "Zync It - This File" API which lets you run the specified Zync Options operation for each sync table in a file. It's a one-click, "sync the whole file" routine we just didn't have working right. If you haven't modified GoZyncMobile yet, just %newwin% [[http://www.seedcode.com/downloads | download]] the latest build and swap out the GoZyncMobile file. If you have modified GoZyncMobile, here is how to make the changes in your copy:

-> 1. Edit the script "Zync It - File (FileName)" and change the line shown in blue %newwin% [[http://www.seedcode.com/rootimages/stikipad/gozync/zyncit1.png | here]].

-> 2. Edit the script "Zync It - Public API..." and add the first block of blue lines shown %newwin% [[http://www.seedcode.com/rootimages/stikipad/gozync/Zynit2.jpg | here]]. Then edit the single line next shown in blue, before adding the End Loop line shown near the end of the script.

-> That's it.

To get the latest build, please download the GoZync files from %newwin% [[http://www.seedcode.com/downloads | seedcode.com/downloads]] and, if you're using MoZync or ProZync, enter your license number.

'''Build 3.1''' (July 21, 2012). Released right after DevCon 2012 this version fixes a couple of broken documentation links, an oversight in one of our transaction scripts, and a bug where the admin password couldn't be changed in GoZyncLicense.

'''Build 3.0''' (July 13, 2012). Our first public build of the new version for FM12.

Previous builds of GoZync can be found [[GoZync2.GoZync2 | here]].
to:
'''Build 4.004''' (June 30, 2012). Our first public build of the new GoZync 4 version.

Docs for versions before GoZync 4 can be found [[GoZync3.GoZync3 | here]].
May 06, 2013, at 12:54 AM by 50.132.84.245 -
Changed lines 9-10 from:
To make these changes in your copy, %newwin% [[http://www.seedcode.com/downloads | download]] 3.173 and then replace the contents of the following scripts in your files with the corresponding scripts in 3.173:
to:
To make these changes in your copy, %newwin% [[http://www.seedcode.com/downloads/files/GoZync4.173.zip | download]] 3.173 and then replace the contents of the following scripts in your files with the corresponding scripts in 3.173:
Changed lines 15-16 from:
'''Build 3.172''' (April 28, 2013). This build improves the speed of the pull, often ''dramatically''. We recommend this for all users of 3.171. To make these changes in your copy, %newwin% [[http://www.seedcode.com/downloads | download]] 3.172 and then replace the contents of the following scripts in your files with the corresponding scripts in 3.172:
to:
'''Build 3.172''' (April 28, 2013). This build improves the speed of the pull, often ''dramatically''. We recommend this for all users of 3.171. To make these changes in your copy, %newwin% [[http://www.seedcode.com/downloads/files/GoZync4.172.zip | download]] 3.172 and then replace the contents of the following scripts in your files with the corresponding scripts in 3.172:
May 06, 2013, at 12:48 AM by 50.132.84.245 -
Changed lines 7-8 from:
The '''latest version''' of the GoZync framework is '''3.173''' (April 30, 2013). This build makes development a bit easier by aborting the pull of record IDs if you're unable to place attachments the inbox. There are only two scripts to replace so we recommend this for all users of 3.172, but it isn't a mod you need to deploy to your users right away.
to:
The '''latest version''' of the GoZync framework is '''3.173''' (April 30, 2013). This build makes testing your integration a bit easier by aborting the pull of record IDs if you're unable to place attachments the inbox. There are only two scripts to replace so we recommend this for all users of 3.172, but it isn't a mod you need to deploy to your users right away.
April 30, 2013, at 05:57 PM by 50.132.84.245 -
Changed lines 7-8 from:
The '''latest version''' of the GoZync framework is 3.173 (April 30, 2013). This build makes development a bit easier by aborting the pull of record IDs if you're unable to place attachments the inbox. There are only two scripts to replace so we recommend this for all users of 3.172, but it isn't a mod you need to deploy to your users right away.
to:
The '''latest version''' of the GoZync framework is '''3.173''' (April 30, 2013). This build makes development a bit easier by aborting the pull of record IDs if you're unable to place attachments the inbox. There are only two scripts to replace so we recommend this for all users of 3.172, but it isn't a mod you need to deploy to your users right away.
April 30, 2013, at 05:57 PM by 50.132.84.245 -
Changed lines 7-8 from:
The '''latest version''' of the GoZync framework is '''3.172''' (April 28, 2013). This build improves the speed of the pull, often dramatically. We recommend this for all users of 3.171. To make these changes in your copy, %newwin% [[http://www.seedcode.com/downloads | download]] 3.172 and then replace the contents of the following scripts in your files with the corresponding scripts in 3.172:
to:
The '''latest version''' of the GoZync framework is 3.173 (April 30, 2013). This build makes development a bit easier by aborting the pull of record IDs if you're unable to place attachments the inbox. There are only two scripts to replace so we recommend this for all users of 3.172, but it isn't a mod you need to deploy to your users right away. 

To make these changes in your copy, %newwin% [[http://www.seedcode.com/downloads | download]] 3.173 and then replace the contents of the following scripts in your files with the corresponding scripts in 3.173
:
Added lines 12-17:
Send Up Package \\
Disconnect From Server

'''Build 3.172''' (April 28, 2013). This build improves the speed of the pull, often ''dramatically''. We recommend this for all users of 3.171. To make these changes in your copy, %newwin% [[http://www.seedcode.com/downloads | download]] 3.172 and then replace the contents of the following scripts in your files with the corresponding scripts in 3.172:

-> In GoZyncMobile: \\
April 28, 2013, at 06:19 PM by 50.132.84.245 -
Changed line 9 from:
-> In GoZyncMobile \\
to:
-> In GoZyncMobile: \\
Changed line 14 from:
-> In GoZyncHosted \\
to:
-> In GoZyncHosted: \\
April 28, 2013, at 06:18 PM by 50.132.84.245 -
Changed lines 7-8 from:
The '''latest version''' of the GoZync framework is '''3.172''' (April 28, 2013). This build improves the speed of the pull, often dramatically. We recommend this for all users of 3.171. To make these changes in your copy, download 3.172 and then replace the contents of the following scripts in your files with the corresponding scripts in 3.172
to:
The '''latest version''' of the GoZync framework is '''3.172''' (April 28, 2013). This build improves the speed of the pull, often dramatically. We recommend this for all users of 3.171. To make these changes in your copy, %newwin% [[http://www.seedcode.com/downloads | download]] 3.172 and then replace the contents of the following scripts in your files with the corresponding scripts in 3.172:

-> In GoZyncMobile \\
Parse Package (Package) \\
Set Fields \\
Delete Records Not In The IDs List (IDs)

-> In GoZyncHosted \\
Create Package FROM TO ( List( $TOName | LastZyncID | RecordID  ))

Then edit the field Interface::GoZyncCodeBase in GoZyncHosted and change the build number to 3.172. [[Distributing Mobile Files | Distribute]] new version of your mobile files and you're all done.

April 28, 2013, at 06:15 PM by 50.132.84.245 -
Changed lines 7-8 from:
The '''latest version''' of the GoZync framework is '''3.171''' (February 27, 2013). We've added a number of refinements to make testing and logging easier and fixed a few edge case bugs. We recommend this for all users of 3.17 and instructions for applying these changes to your files can be found %newwin% [[http://www.seedcode.com/support/viewtopic.php?f=38&t=3818 | here]].
to:
The '''latest version''' of the GoZync framework is '''3.172''' (April 28, 2013). This build improves the speed of the pull, often dramatically. We recommend this for all users of 3.171. To make these changes in your copy, download 3.172 and then replace the contents of the following scripts in your files with the corresponding scripts in 3.172

'''Build
3.171''' (February 27, 2013). We've added a number of refinements to make testing and logging easier and fixed a few edge case bugs. We recommend this for all users of 3.17 and instructions for applying these changes to your files can be found %newwin% [[http://www.seedcode.com/support/viewtopic.php?f=38&t=3818 | here]].
February 27, 2013, at 10:17 PM by 50.132.84.245 -
Changed lines 7-8 from:
The '''latest version''' of the GoZync framework is '''3.17''' (December 18, 2012) This build adds one new feature to GoZync: it lets you pass up from mobile a set of name/value pairs that can be used when filtering records to pull down to your device. Previously we generally used the logged in Account Name in GoZyncHosted to know who was syncing and filter the found set for them accordingly. That still works great (and is very secure) if all you need to know is *who* is syncing.
to:
The '''latest version''' of the GoZync framework is '''3.171''' (February 27, 2013). We've added a number of refinements to make testing and logging easier and fixed a few edge case bugs. We recommend this for all users of 3.17 and instructions for applying these changes to your files can be found %newwin% [[http://www.seedcode.com/support/viewtopic.php?f=38&t=3818 | here]].

'''Build
3.17''' (December 18, 2012) This build adds one new feature to GoZync: it lets you pass up from mobile a set of name/value pairs that can be used when filtering records to pull down to your device. Previously we generally used the logged in Account Name in GoZyncHosted to know who was syncing and filter the found set for them accordingly. That still works great (and is very secure) if all you need to know is *who* is syncing.
Changed lines 7-8 from:
The '''latest version''' of the GoZync framework is '''3.17''' (December 18, 2012) This build adds one new feature to GoZync: it lets you pass up from mobile a set of name/value pairs that can be used when filtering records to pull down to your device. Previously we generally used the logged in Account Name in GoZyncHosted to know who was syncing and filter the found set for them accordingly. And that still works great (and is very secure) if all you need to know is *who* is syncing.
to:
The '''latest version''' of the GoZync framework is '''3.17''' (December 18, 2012) This build adds one new feature to GoZync: it lets you pass up from mobile a set of name/value pairs that can be used when filtering records to pull down to your device. Previously we generally used the logged in Account Name in GoZyncHosted to know who was syncing and filter the found set for them accordingly. That still works great (and is very secure) if all you need to know is *who* is syncing.
December 18, 2012, at 01:12 AM by 50.132.84.245 -
Changed lines 7-8 from:
The '''latest version''' of the GoZync framework is '''3.16''' (November 21, 2012). With this version we've made a lot of changes to speed up syncs, squashed a few integration bugs, and made the integration process a little more hardy. Changes in 3.16 can be applied to your build by following the instructions %newwin% [[http://www.seedcode.com/support/viewtopic.php?f=38&t=3746 | here]]. We recommend this update for all users of 3.14 even if you're already up and running.
to:
The '''latest version''' of the GoZync framework is '''3.17''' (December 18, 2012) This build adds one new feature to GoZync: it lets you pass up from mobile a set of name/value pairs that can be used when filtering records to pull down to your device. Previously we generally used the logged in Account Name in GoZyncHosted to know who was syncing and filter the found set for them accordingly. And that still works great (and is very secure) if all you need to know is *who* is syncing.

This feature is more for situations when a user may get to select which records they want to sync. For example they may ask to see records from a date range, or appointments for a geographic region they may be visiting tomorrow. These criteria can now be easily passed up to GoZyncHosted and used in your modifications of the "Filter Records to Zync" script there. Instructions on how to take advantage of this are [[DownloadingFoundSets | here]].

We recommend this for all users of 3.16. Instructions for applying the changes to your file follow can be found %newwin% [[http://www.seedcode.com/support/viewtopic.php?f=38&t=3770 | here]].

'''Build
3.16''' (November 21, 2012). With this version we've made a lot of changes to speed up syncs, squashed a few integration bugs, and made the integration process a little more hardy. Changes in 3.16 can be applied to your build by following the instructions %newwin% [[http://www.seedcode.com/support/viewtopic.php?f=38&t=3746 | here]]. We recommend this update for all users of 3.14 even if you're already up and running.
November 21, 2012, at 02:57 PM by 50.132.84.245 -
Changed lines 7-8 from:
The '''latest version''' of the GoZync framework is '''3.16''' (November 21, 2012). With this version we've made a lot of changes to speed up syncs, squashed a few integration bugs, and made the integration process a little more hardy. Changes in 3.16 can be applied to your build by following the instructions %newwin% [[http://www.seedcode.com/support/viewtopic.php?f=38&t=3746 | here]]. We recommend this update for all users of > 3.14 even if you're already up and running.
to:
The '''latest version''' of the GoZync framework is '''3.16''' (November 21, 2012). With this version we've made a lot of changes to speed up syncs, squashed a few integration bugs, and made the integration process a little more hardy. Changes in 3.16 can be applied to your build by following the instructions %newwin% [[http://www.seedcode.com/support/viewtopic.php?f=38&t=3746 | here]]. We recommend this update for all users of 3.14 even if you're already up and running.
November 21, 2012, at 02:57 PM by 50.132.84.245 -
Changed lines 7-8 from:
The '''latest version''' of the GoZync framework is '''3.16''' (November 21, 2012). With this version we made a lot of changes to speed up syncs, squash a few integration bugs, and make the integration process a little more hardy. Changes in 3.16 can be applied to your build by following the instructions %newwin% [[http://www.seedcode.com/support/viewtopic.php?f=38&t=3746 | here]]. We recommend this update for all users of > 3.14 even if you're already up and running.
to:
The '''latest version''' of the GoZync framework is '''3.16''' (November 21, 2012). With this version we've made a lot of changes to speed up syncs, squashed a few integration bugs, and made the integration process a little more hardy. Changes in 3.16 can be applied to your build by following the instructions %newwin% [[http://www.seedcode.com/support/viewtopic.php?f=38&t=3746 | here]]. We recommend this update for all users of > 3.14 even if you're already up and running.
November 21, 2012, at 02:11 PM by 50.132.84.245 -
Changed lines 7-8 from:
The '''latest version''' of the GoZync framework is '''3.14''' (September 25, 2012). This build fixed three bugs you may have run into if you were syncing related tables:: a bug in GoZyncHosted where we sometimes failed to pickup foreign keys;  a problem where there would be errors if the layout and TO named didn't match; and an issue where we weren't getting related containers when FLM was off.
to:
The '''latest version''' of the GoZync framework is '''3.16''' (November 21, 2012). With this version we made a lot of changes to speed up syncs, squash a few integration bugs, and make the integration process a little more hardy. Changes in 3.16 can be applied to your build by following the instructions %newwin% [[http://www.seedcode.com/support/viewtopic.php?f=38&t=3746 | here]]. We recommend this update for all users of > 3.14 even if you're already up and running.

'''Build
3.14''' (September 25, 2012). This build fixed three bugs you may have run into if you were syncing related tables:: a bug in GoZyncHosted where we sometimes failed to pickup foreign keys;  a problem where there would be errors if the layout and TO named didn't match; and an issue where we weren't getting related containers when FLM was off.
Changed lines 9-10 from:
All three bugs are fixed by changing scripts in GoZyncHosted. Instructions for making the changes can be found here (coming soon).
to:
All three bugs are fixed by changing scripts in GoZyncHosted. Instructions for making the changes can be found %newwin% [[http://www.seedcode.com/support/viewtopic.php?f=38&t=3674 | here]].
Changed lines 7-8 from:
The '''latest version''' of the GoZync framework is '''3.13''' (August 22, 2012). This build fixed another issue in the "Zync It - This File" API where we were using the first specified action for all tables in the file. To fix this in your copy, take a look at %newwin% [[http://www.seedcode.com/rootimages/stikipad/gozync/zyncit2.png | this screen shot]]. Edit that script in GoZyncMobile and add the first line shown in blue; then edit the second blue line to use the new variable name. That's it.
to:
The '''latest version''' of the GoZync framework is '''3.14''' (September 25, 2012). This build fixed three bugs you may have run into if you were syncing related tables:: a bug in GoZyncHosted where we sometimes failed to pickup foreign keys;  a problem where there would be errors if the layout and TO named didn't match; and an issue where we weren't getting related containers when FLM was off.

All three bugs are fixed by changing scripts in GoZyncHosted. Instructions for making the changes can be found here (coming soon).

'''Build
3.13''' (August 22, 2012). This build fixed another issue in the "Zync It - This File" API where we were using the first specified action for all tables in the file. To fix this in your copy, take a look at %newwin% [[http://www.seedcode.com/rootimages/stikipad/gozync/zyncit2.png | this screen shot]]. Edit that script in GoZyncMobile and add the first line shown in blue; then edit the second blue line to use the new variable name. That's it.
August 22, 2012, at 04:56 PM by 50.132.84.245 -
Changed lines 7-8 from:
The '''latest version''' of the GoZync framework is '''3.12''' (August 13, 2012). This build fixed the "Zync It - This File" API which lets you run the specified Zync Options operation for each sync table in a file. It's a one-click, "sync the whole file" routine we just didn't have working right. If you haven't modified GoZyncMobile yet, just %newwin% [[http://www.seedcode.com/downloads | download]] the latest build and swap out the GoZyncMobile file. If you have modified GoZyncMobile, here is how to make the changes in your copy:
to:
The '''latest version''' of the GoZync framework is '''3.13''' (August 22, 2012). This build fixed another issue in the "Zync It - This File" API where we were using the first specified action for all tables in the file. To fix this in your copy, take a look at %newwin% [[http://www.seedcode.com/rootimages/stikipad/gozync/zyncit2.png | this screen shot]]. Edit that script in GoZyncMobile and add the first line shown in blue; then edit the second blue line to use the new variable name. That's it.

'''Build
3.12''' (August 13, 2012). This build fixed the "Zync It - This File" API which lets you run the specified Zync Options operation for each sync table in a file. It's a one-click, "sync the whole file" routine we just didn't have working right. If you haven't modified GoZyncMobile yet, just %newwin% [[http://www.seedcode.com/downloads | download]] the latest build and swap out the GoZyncMobile file. If you have modified GoZyncMobile, here is how to make the changes in your copy:
August 14, 2012, at 03:06 AM by 50.132.84.245 -
Changed lines 9-14 from:
1. Edit the script "Zync It - File (FileName)" and change the line shown in blue %newwin% [[http://www.seedcode.com/rootimages/stikipad/gozync/zyncit1.png | here]].

2. Edit the script "Zync It - Public API..." and add the first block of blue lines shown %newwin% [[http://www.seedcode.com/rootimages/stikipad/gozync/Zynit2.jpg | here]]. Then edit the single line next shown in blue, before adding the End Loop line shown near the end of the script.

That's it.
to:
-> 1. Edit the script "Zync It - File (FileName)" and change the line shown in blue %newwin% [[http://www.seedcode.com/rootimages/stikipad/gozync/zyncit1.png | here]].

-> 2. Edit the script "Zync It - Public API..." and add the first block of blue lines shown %newwin% [[http://www.seedcode.com/rootimages/stikipad/gozync/Zynit2.jpg | here]]. Then edit the single line next shown in blue, before adding the End Loop line shown near the end of the script.

-> That's it.
August 14, 2012, at 03:06 AM by 50.132.84.245 -
Changed lines 11-12 from:
2. Edit the script "Zync It - Public API..." and add the first block of blue lines shown %newwin% [[http://www.seedcode.com/rootimages/stikipad/gozync/Zynit2.jpg | here]]. Then edit the single line next shown in blue, before adding the line shown near the end of the script.
to:
2. Edit the script "Zync It - Public API..." and add the first block of blue lines shown %newwin% [[http://www.seedcode.com/rootimages/stikipad/gozync/Zynit2.jpg | here]]. Then edit the single line next shown in blue, before adding the End Loop line shown near the end of the script.
August 14, 2012, at 03:05 AM by 50.132.84.245 -
Changed lines 7-8 from:
The '''latest version''' of the GoZync framework is '''3.1''' (July 21, 2012). Released right after DevCon 2012 this version fixes a couple of broken documentation links, an oversight in one of our transaction scripts, and a bug where the admin password couldn't be changed in GoZyncLicense.
to:
The '''latest version''' of the GoZync framework is '''3.12''' (August 13, 2012). This build fixed the "Zync It - This File" API which lets you run the specified Zync Options operation for each sync table in a file. It's a one-click, "sync the whole file" routine we just didn't have working right. If you haven't modified GoZyncMobile yet, just %newwin% [[http://www.seedcode.com/downloads | download]] the latest build and swap out the GoZyncMobile file. If you have modified GoZyncMobile, here is how to make the changes in your copy:

1. Edit the script "Zync It - File (FileName)" and change the line shown in blue %newwin% [[http://www.seedcode.com/rootimages/stikipad/gozync/zyncit1.png | here]].

2. Edit the script "Zync It - Public API..." and add the first block of blue lines shown %newwin% [[http://www.seedcode.com/rootimages/stikipad/gozync/Zynit2.jpg | here]]. Then edit the single line next shown in blue, before adding the line shown near the end of the script.

That's it
.
Added lines 17-18:
'''Build 3.1''' (July 21, 2012). Released right after DevCon 2012 this version fixes a couple of broken documentation links, an oversight in one of our transaction scripts, and a bug where the admin password couldn't be changed in GoZyncLicense.
July 21, 2012, at 05:41 PM by 64.134.151.81 -
Changed lines 9-10 from:
To get the latest build, please download the code base from %newwin% [[http://www.seedcode.com/downloads | seedcode.com/downloads]] and, if you're using MoZync or ProZync, enter your license number.
to:
To get the latest build, please download the GoZync files from %newwin% [[http://www.seedcode.com/downloads | seedcode.com/downloads]] and, if you're using MoZync or ProZync, enter your license number.
July 21, 2012, at 05:40 PM by 64.134.151.81 -
Changed lines 3-6 from:
The number for your copy of GoZync can be found on the bottom edge of the Home layout in GoZync Connector, or the GoZync file itself. You'll also find a field called CodeBase in the Interface table of both files.

In your mobile file (the file used on FMGo), the build number is in a script called "GoZync Build Number" in the Developer folder.

to:
The number for your copy of GoZync can be found on the bottom edge of most layouts in GoZyncHosted. You'll also find a field called GoZyncCodeBase in the Interface table of the hosted and local files.
July 21, 2012, at 05:39 PM by 64.134.151.81 -
Changed lines 9-10 from:
The '''latest version''' of the GoZync framework is '''3.1' (July 21, 2012). Released right after DevCon 2012 this version fixes a couple of broken documentation links, an oversight in one of our transaction scripts, and a bug where the admin password couldn't be changed in GoZyncLicense.
to:
The '''latest version''' of the GoZync framework is '''3.1''' (July 21, 2012). Released right after DevCon 2012 this version fixes a couple of broken documentation links, an oversight in one of our transaction scripts, and a bug where the admin password couldn't be changed in GoZyncLicense.
July 21, 2012, at 05:39 PM by 64.134.151.81 -
Changed lines 11-12 from:
To get the latest build, please download the code base from <a href="http://www.seedcode.com/downloads" target="blank">seedcode.com/downloads</a> and, if you're using MoZync or ProZync, enter your license number.
to:
To get the latest build, please download the code base from %newwin% [[http://www.seedcode.com/downloads | seedcode.com/downloads]] and, if you're using MoZync or ProZync, enter your license number.
July 21, 2012, at 05:39 PM by 64.134.151.81 -
Changed lines 11-21 from:
'''Build 1.3.2''' (July 9, 2011). This build fixes a few small bugs and misspellings. It also introduced "flattening" to make it easier to include related fields in a flat document. If you've already integrated you don't need this.

'''Build 1.3''' (July 1, 2011). This was our first public build and we now have a public demo %newwin% [[http://www.seedcode.com/downloads | available]].

'''Build 1.2.8''' (June 7, 2011). Here we've introduced more error captures during the zync process and have finished commenting and standardizing the language in our scripts.

'''Build 1.2.5''' (May 22, 2011) This build continues to refine the script comments, error trapping, and naming conventions to make integration easier.

'''Build 1.2.2''' (May 10, 2011). This build introduced support for multiple mobile files and began the refactoring of our integration routines.

'''Build 1.2''' (April 13, 2011). This was a private build for our early customers
.
to:
To get the latest build, please download the code base from <a href="http://www.seedcode.com/downloads" target="blank">seedcode.com/downloads</a> and, if you're using MoZync or ProZync, enter your license number.

'''Build 3.0''' (July 13, 2012). Our first public build of the new version for FM12.

Previous builds of GoZync can be found [[GoZync2.GoZync2 | here]]
.
July 21, 2012, at 05:35 PM by 64.134.151.81 -
Changed lines 9-10 from:
The '''latest version''' of the GoZync framework is '''1.3.8''' (Sept 12, 2011). This build introduces renamed and reorganized scripts and script folders as part of a documentation rewrite to make integrations easier. The version also introduces the ability to pull container fields down to the mobile file and improves the user feedback of zyncs done in Pro vs Go.
to:
The '''latest version''' of the GoZync framework is '''3.1' (July 21, 2012). Released right after DevCon 2012 this version fixes a couple of broken documentation links, an oversight in one of our transaction scripts, and a bug where the admin password couldn't be changed in GoZyncLicense.
Changed lines 9-10 from:
The '''latest version''' of the GoZync framework is '''1.3.8''' (Sept 9, 2011). This build introduces renamed and reorganized scripts and script folders as part of a documentation rewrite to make integrations easier. The version also introduces the ability to pull container fields down to the mobile file and improves the user feedback of zyncs done in Pro vs Go.
to:
The '''latest version''' of the GoZync framework is '''1.3.8''' (Sept 12, 2011). This build introduces renamed and reorganized scripts and script folders as part of a documentation rewrite to make integrations easier. The version also introduces the ability to pull container fields down to the mobile file and improves the user feedback of zyncs done in Pro vs Go.
Changed lines 9-10 from:
The '''latest version''' of the GoZync framework is '''1.3.2''' (July 9, 2011). This build fixes a few small bugs and misspellings. It also introduced "flattening" to make it easier to include related fields in a flat document. If you've already integrated you don't need this.
to:
The '''latest version''' of the GoZync framework is '''1.3.8''' (Sept 9, 2011). This build introduces renamed and reorganized scripts and script folders as part of a documentation rewrite to make integrations easier. The version also introduces the ability to pull container fields down to the mobile file and improves the user feedback of zyncs done in Pro vs Go.

'''Build
1.3.2''' (July 9, 2011). This build fixes a few small bugs and misspellings. It also introduced "flattening" to make it easier to include related fields in a flat document. If you've already integrated you don't need this.
July 09, 2011, at 08:01 PM by 76.22.74.86 -
Changed lines 9-10 from:
The '''latest version''' of the GoZync framework is '''1.3''' (July 1, 2011). This is our first public build and we now have a public demo %newwin% [[http://www.seedcode.com/downloads | available]].
to:
The '''latest version''' of the GoZync framework is '''1.3.2''' (July 9, 2011). This build fixes a few small bugs and misspellings. It also introduced "flattening" to make it easier to include related fields in a flat document. If you've already integrated you don't need this.

'''Build 1.3''' (July 1, 2011). This was
our first public build and we now have a public demo %newwin% [[http://www.seedcode.com/downloads | available]].
July 01, 2011, at 08:31 PM by 76.22.74.86 -
Changed lines 9-10 from:
The '''latest version''' of the GoZync framework is '''1.3''' (July 1, 2011). This is our first public build and we now have a public demo available.
to:
The '''latest version''' of the GoZync framework is '''1.3''' (July 1, 2011). This is our first public build and we now have a public demo %newwin% [[http://www.seedcode.com/downloads | available]].
July 01, 2011, at 08:31 PM by 76.22.74.86 -
Changed lines 9-10 from:
The '''latest version''' of the GoZync framework is '''1.2.8''' (June 7, 2011). Here we've introduced more error captures during the zync process and have finished commenting and standardizing the language in our scripts.
to:
The '''latest version''' of the GoZync framework is '''1.3''' (July 1, 2011). This is our first public build and we now have a public demo available.

'''Build
1.2.8''' (June 7, 2011). Here we've introduced more error captures during the zync process and have finished commenting and standardizing the language in our scripts.
June 07, 2011, at 03:34 PM by 76.22.74.86 -
June 07, 2011, at 03:34 PM by 76.22.74.86 -
Changed lines 7-10 from:
!! What is the latest codebase of Zulu?

The '''latest version''' of the GoZync is '''1.2.5''' (May 22, 2011). This build continues to refine the script comments, error trapping, and naming conventions to make integration easier.
to:
!! What is the latest version of GoZync?

The '''latest version''' of the GoZync framework is '''1.2.8''' (June 7, 2011). Here we've introduced more error captures during the zync process and have finished commenting and standardizing the language in our scripts.

'''Build 1.2.5''' (May 22, 2011)
This build continues to refine the script comments, error trapping, and naming conventions to make integration easier.
May 22, 2011, at 06:34 PM by 76.22.74.86 -
Changed lines 9-10 from:
The '''latest version''' of the GoZync is '''1.2.2''' (May 10, 2011). This build introduced support for multiple mobile files and began the refactoring of our integration routines.
to:
The '''latest version''' of the GoZync is '''1.2.5''' (May 22, 2011). This build continues to refine the script comments, error trapping, and naming conventions to make integration easier.

'''Build
1.2.2''' (May 10, 2011). This build introduced support for multiple mobile files and began the refactoring of our integration routines.
May 15, 2011, at 02:22 PM by 76.22.74.86 -
Changed lines 9-10 from:
The '''latest version''' of the GoZync is '''1.2.2''' (May 10, 2011). This build introduced multiple mobile files and began the refactoring of our integration routines.
to:
The '''latest version''' of the GoZync is '''1.2.2''' (May 10, 2011). This build introduced support for multiple mobile files and began the refactoring of our integration routines.
May 15, 2011, at 02:22 PM by 76.22.74.86 -
Changed lines 9-11 from:
The '''latest version''' of the GoZync is '''1.2''' (April 13, 2011). This is a private build for our early customers.
to:
The '''latest version''' of the GoZync is '''1.2.2''' (May 10, 2011). This build introduced multiple mobile files and began the refactoring of our integration routines.

'''Build 1.2''' (April 13, 2011). This was
a private build for our early customers.
April 13, 2011, at 10:21 PM by 76.22.74.86 -
Changed lines 1-4 from:
!! Where can I find my build number?

The build number for your copy of GoZync can be found on the bottom edge of the Home layout in GoZync Connector, or the GoZync file itself. You'll also find a field called BuildNumber in the Interface table of both files.
to:
!! Where can I find my codebase number?

The number for your copy of GoZync can be found on the bottom edge of the Home layout in GoZync Connector, or the GoZync file itself. You'll also find a field called CodeBase in the Interface table of both files.
Changed lines 7-9 from:
!! What is the latest build of Zulu?

The '''latest build''' of the GoZync is '''1.2''' (April 13, 2011). This is a private build for our early customers.
to:
!! What is the latest codebase of Zulu?

The '''latest version''' of the GoZync is '''1.2''' (April 13, 2011). This is a private build for our early customers.
April 13, 2011, at 09:14 PM by 76.22.74.86 -
Added lines 1-9:
!! Where can I find my build number?

The build number for your copy of GoZync can be found on the bottom edge of the Home layout in GoZync Connector, or the GoZync file itself. You'll also find a field called BuildNumber in the Interface table of both files.

In your mobile file (the file used on FMGo), the build number is in a script called "GoZync Build Number" in the Developer folder.

!! What is the latest build of Zulu?

The '''latest build''' of the GoZync is '''1.2''' (April 13, 2011). This is a private build for our early customers.
(855) SEEDCODE
support@seedcode.com
Follow us: