GoZync3

First Zync

GoZync3.FirstZync History

Hide minor edits - Show changes to output

August 05, 2013, at 04:15 AM by 50.132.84.245 -
Added lines 1-2:
(:include NewerDocs:)
February 26, 2013, at 10:27 PM by 50.132.84.245 -
Changed lines 15-16 from:
!! Testing
to:
!! Zync It!
February 26, 2013, at 10:26 PM by 50.132.84.245 -
Added lines 7-16:
!! Turning on Testing Mode

If you have more than a hundred records to sync, you may want to set Testing Mode to "ON" n the upper right of the dashboard layout of GoZyncHosted.

''Testing Mode was introduced in [[VersionHistory | version]] 3.171''

Testing Mode restricts the sync to consider just the last 5 records in your table as having changed since the last sync. This can make troubleshooting much quicker as you don't have to wait for long syncs (such as after hitting "reset" in GoZyncMobile).

!! Testing

December 18, 2012, at 10:15 AM by cm - minor edits and clarifications
Changed lines 3-4 from:
Once you've completed the [[integration]] for one table, you can test your sync. While you'll eventually want to test his from your iPhone, iPad, or laptop (offline) to your host/server, you can start testing right now, in FileMaker Pro, with all the files opened by the same copy of Pro.
to:
Once you've completed the [[integration]] for one table, you can test your sync. While you'll eventually want to test this from your iPhone, iPad, or laptop (offline) to your host/server, you can start testing right now, in FileMaker Pro, with all the files opened by the same copy of Pro.
Changed lines 7-8 from:
'''1.''' In your mobile file, navigate to the layout selected for syncing in step one of [[Integration1Of4 | Tab 1 of 4]]. Enter browse mode. Make a new record on this layout and fill out a few fields-- or if you're pulling records only, make a new record in the corresponding table of your hosted file.
to:
'''1.''' In your mobile file, navigate to the layout selected for syncing in step one of [[Integration1Of4 | Tab 1 of 4]]. Enter browse mode. Make a new record on this layout and fill out a few fields – or if you're pulling records only, make a new record in the corresponding table of your hosted file.
Changed lines 11-12 from:
'''3.''' Run that script. In FileMaker Pro you'll see a progress bar as the sync completes, in FileMaker Go you'll see a spinning busy icon.
to:
'''3.''' Run that script. In FileMaker Pro you'll see a progress bar as the sync completes. In FileMaker Go you'll see a spinning busy icon.
Changed lines 15-18 from:
-> '''Push:''' If all you did was push, visit the Inbox of GoZyncHosted; you'll see your newly zynced records waiting for you at the end of the inbox. Select one or more of those and click "Process Selected Items". If you didn't have any [[processing errors]] you can now see your records in your hosted file.

-> '''Pull:''' If you pulled, and you created a record in hosted. you should see that new record you created on the host now in your mobile file. If you pulled without first pushing, then the new record you created on Mobile was deleted because it didn't "belong" to you on the host. Learn more about [[Deletes | how GoZync handles deletes]].
to:
-> '''Push:''' If all you did was push, visit the Inbox of GoZyncHosted; you'll see your newly Zynced records waiting for you at the end of the inbox. Select one or more of those and click "Process Selected Items". If you didn't have any [[processing errors]] you can now see your records in your hosted file.

-> '''Pull:''' If you pulled, and you created a record in hosted, you should see that new record you created on the host now in your mobile file. If you pulled without first pushing, then the new record you created on Mobile was deleted because it didn't "belong" to you on the host. Learn more about [[Deletes | how GoZync handles deletes]].
November 11, 2012, at 07:24 PM by 50.132.84.245 -
Changed lines 17-20 from:
-> '''Pull:''' If you pulled, and you created a record in hosted. you should see that new record you created on the host now in your mobile file. If you pulled without first pushing, then the new record you created on Mobile was deleted because it didn't "belong" to you on the host. Learn more about how GoZync handles deletes here:

->
'''Round Trip:''' With only having created one new record, you probably see that new record in your hosted file, much as if you pushed and the processed the inbox.\
to:
-> '''Pull:''' If you pulled, and you created a record in hosted. you should see that new record you created on the host now in your mobile file. If you pulled without first pushing, then the new record you created on Mobile was deleted because it didn't "belong" to you on the host. Learn more about [[Deletes | how GoZync handles deletes]].

->
'''Round Trip:''' With only having created one new record, you'll see that new record in your hosted file, much as if you pushed and then processed the inbox.
November 11, 2012, at 07:21 PM by 50.132.84.245 -
Changed lines 9-10 from:
'''2.''' Open scripts and find the script "Zync It - This Table" inside the folder "GoZync".
to:
'''2.''' Still in your mobile file, open scripts and find the script "Zync It - This Table" inside the folder "GoZync".
Changed lines 17-18 from:
-> '''Pull:''' If you pulled, you should see that new record you created on the host now in your mobile file.
to:
-> '''Pull:''' If you pulled, and you created a record in hosted. you should see that new record you created on the host now in your mobile file. If you pulled without first pushing, then the new record you created on Mobile was deleted because it didn't "belong" to you on the host. Learn more about how GoZync handles deletes here:
July 07, 2012, at 10:15 PM by 50.132.84.245 -
Changed lines 23-24 from:
If so the logs are the first place to go: [[Reading the Logs]].
to:
If so, the logs are the first place to go: [[Reading the Logs]].
July 07, 2012, at 10:15 PM by 50.132.84.245 -
Changed lines 19-25 from:
-> '''Round Trip:''' With only having created one new record, you probably see that new record in your hosted file, much as if you pushed and the processed the inbox.
to:
-> '''Round Trip:''' With only having created one new record, you probably see that new record in your hosted file, much as if you pushed and the processed the inbox.\

'''See any errors?'''

If so the logs are the first place to go: [[Reading the Logs]].

You might also check out: [[Troubleshooting]]
.
July 07, 2012, at 10:10 PM by 50.132.84.245 -
Changed lines 7-13 from:
1. In your mobile file, navigate to the layout selected for syncing in step one of [[Integration1Of4 | Tab 1 of 4]]. Enter browse mode. Make a new record on this layout and fill out a few fields-- or if you're pulling records only, make a new record in the corresponding table of your hosted file.

2. Open scripts and find the script "Zync It - This Table" inside the folder "GoZync".

3. Run that script. In FileMaker Pro you'll see a progress bar as the sync completes, in FileMaker Go you'll see a spinning busy icon.

4. What happens next depends on the Zync Options you set for your table.
to:
'''1.''' In your mobile file, navigate to the layout selected for syncing in step one of [[Integration1Of4 | Tab 1 of 4]]. Enter browse mode. Make a new record on this layout and fill out a few fields-- or if you're pulling records only, make a new record in the corresponding table of your hosted file.

'''2.''' Open scripts and find the script "Zync It - This Table" inside the folder "GoZync".

'''3.''' Run that script. In FileMaker Pro you'll see a progress bar as the sync completes, in FileMaker Go you'll see a spinning busy icon.

'''4.''' What happens next depends on the Zync Options you set for your table.

-> '''Push:''' If all you did was push, visit the Inbox of GoZyncHosted; you'll see your newly zynced records waiting for you at the end of the inbox. Select one or more of those and click "Process Selected Items". If you didn't have any [[processing errors]] you can now see your records in your hosted file.

-> '''Pull:''' If you pulled, you should see that new record you created on the host now in your mobile file.

-> '''Round Trip:''' With only having created one new record, you probably see that new record in your hosted file, much as if you pushed and the processed the inbox
.
July 07, 2012, at 10:05 PM by 50.132.84.245 -
Added lines 1-13:
!! Testing your first sync

Once you've completed the [[integration]] for one table, you can test your sync. While you'll eventually want to test his from your iPhone, iPad, or laptop (offline) to your host/server, you can start testing right now, in FileMaker Pro, with all the files opened by the same copy of Pro.

(Remember, GoZync doesn't need FileMaker Server, so you can test it in Pro as you're developing.)

1. In your mobile file, navigate to the layout selected for syncing in step one of [[Integration1Of4 | Tab 1 of 4]]. Enter browse mode. Make a new record on this layout and fill out a few fields-- or if you're pulling records only, make a new record in the corresponding table of your hosted file.

2. Open scripts and find the script "Zync It - This Table" inside the folder "GoZync".

3. Run that script. In FileMaker Pro you'll see a progress bar as the sync completes, in FileMaker Go you'll see a spinning busy icon.

4. What happens next depends on the Zync Options you set for your table.
(855) SEEDCODE
[email protected]
Follow us: