Page 1 of 1

Printing problem

PostPosted: Mon Aug 18, 2008 6:50 am
by jrivera
Short letters do not print on separate pages. So I'll have 2 different contacts printed on one standard 8 1/2 x 11 sheet with one header graphic. It also appears this way in the preview. Please advise.

PostPosted: Mon Aug 18, 2008 7:21 am
by John Sindelar
You're right: you need to make a simple change to the Letter layout in order for very short letters to break correctly.

Enter layout mode and move to the Letter layout (one of the last layouts in fmSpark). Double click on the Body separator running down the left side of the layout and check the box marked "Page Break Every [1] Occurrences".

(While you're in there you might want to lengthen the layout by increasing the size of the body part and then extending the length of the "TextArray" field to match.)

Hope that helps,