Zync Child Records

Help, Tips, and Tricks for deploying GoZync: our "sync" engine for FileMaker Go.
Posts: 23
Joined: Thu Jun 26, 2014 2:41 am
PostPosted: Tue Jul 01, 2014 4:38 am
Good Afternoon,

I'm having problems with zyncing child tables.

I have everything linked up in GZM and I have setup the Parent/Child in GZH.

I can successfully return all records from the parent table, but nothing for the Child table.

Can anyone offer some advise on the setup that is required? hopefully im missing something fairly simple.

Thanks,
Rick
SeedCode Staff
SeedCode Staff
Posts: 475
Joined: Wed Jan 02, 2013 11:47 am
PostPosted: Tue Jul 01, 2014 5:57 am
Hi Rick. It's hard to say what might be wrong with your setup, but I'd be happy to have a look at your files and help you troubleshoot. You can send your files to me at [email protected]
Posts: 23
Joined: Thu Jun 26, 2014 2:41 am
PostPosted: Tue Jul 01, 2014 7:59 am
Hi Jeff,

Thanks for the reply, I have sent the files through to support as requested.

Thanks,
Rick
Posts: 23
Joined: Thu Jun 26, 2014 2:41 am
PostPosted: Wed Jul 02, 2014 2:49 am
Hi Jeff,

Thanks for your emails last night.

I have checked the tables and can confirm that there is data in the ContactKey and CustomerKey but I am still only receiving Customer Information and no Contact Information.

Please can you advise any further?

Thanks,
Rick
SeedCode Staff
SeedCode Staff
Posts: 475
Joined: Wed Jan 02, 2013 11:47 am
PostPosted: Wed Jul 02, 2014 8:27 am
Send me your current files again ([email protected]), with the changes you have made and I'll help you figure out what still needs to be done. -Jeff

Return to GoZync

Who is online

Users browsing this forum: No registered users and 2 guests

cron
(855) SEEDCODE
[email protected]
Follow us: