Integration 2 Of 4
GoZync3.Integration2Of4 History
Hide minor edits - Show changes to output
December 19, 2012, at 11:24 PM
by - minor edits and clarifications
Changed lines 3-4 from:
You may have nothing to do on this tab and arrive here with a green checkbox already "OK" at the top of the screen. In particular, if the layout you chose on the previous screen doesn't have any related fields on it then there is nothing to do here and you can move on to [[Integration3Of4 | Step 3 of 4]].
to:
You may have nothing to do on this tab and arrive here with a green checkbox already "OK" at the top of the screen. In particular, if the layout you chose on the previous screen doesn't have any related fields on it, then there is nothing to do here and you can move on to [[Integration3Of4 | Step 3 of 4]].
Changed lines 21-24 from:
-> Select File / Manage / Database and select the relationships tab: click the "+" button in the lower right to begin adding a new table occurrence.
-> Create one new tableoccurrence for each row shown in step 5 with a caution icon on it (see below). Do the same in GoZyncMobile, creating a new TO for each row.
-> Create one new table
to:
-> Select File / Manage / Database in GoZyncHosted (GZH) and select the relationships tab: click the "+" button in the lower right to begin adding a new table occurrence.
-> Create one new table occurrence for each row shown in step 5 with a caution icon on it (see below). Do the same in GoZyncMobile (GZM), creating a new TO for each row.
-> Create one new table occurrence for each row shown in step 5 with a caution icon on it (see below). Do the same in GoZyncMobile (GZM), creating a new TO for each row.
Changed lines 5-6 from:
But if you do have related fields on your layout, GoZync will pick them up and create additional table occurrence (TO) rows for them: each of which needs a table occurrence and a blank layout added to GoZyncHosted (GZH) and to GoZyncMobile (GZM).
to:
But if you do have related fields on your layout, GoZync will pick them up and create additional table occurrence (TO) rows for them on the Related Tables tab of the integration wizard in GZH: each of which needs a table occurrence and a blank layout added to GoZyncHosted (GZH) and to GoZyncMobile (GZM).
Changed lines 17-18 from:
!! Step 6: Create additional table occurrences and layouts [[#TOs]]
to:
!! Step 5: Create additional table occurrences and layouts [[#TOs]]
Changed lines 9-10 from:
LowZync, the free version of GoZync only supports syncing a single Table Occurrence and ships with our example QuickContact file already syncing. If you want to sync your file instead you'll need to stop syncing QuickContact or %newwin% [[http://www.seedcode.com/cp-app/ste_cat/gozync#licenses | purchase a GoZync license]]. Here's how to remove QuickContact...
to:
LowZync, the free version of GoZync, only supports syncing a single Table Occurrence and ships with our example QuickContact file already syncing. If you want to sync your file instead you'll need to stop syncing QuickContact or %newwin% [[http://www.seedcode.com/cp-app/ste_cat/gozync#licenses | purchase a GoZync license]]. Here's how to remove QuickContact...
Added lines 7-16:
!! A Note About the Free Version
LowZync, the free version of GoZync only supports syncing a single Table Occurrence and ships with our example QuickContact file already syncing. If you want to sync your file instead you'll need to stop syncing QuickContact or %newwin% [[http://www.seedcode.com/cp-app/ste_cat/gozync#licenses | purchase a GoZync license]]. Here's how to remove QuickContact...
-> First, you may want to make a backup of these files incase you'd like to refer to a copy with QuickContact integrated.
-> Next, visit the dashboard in GoZyncHosted and click the "delete" button in the "QuickContactHosted" row.
-> Now delete the "Contacts" table occurrence from both GoZyncHosted.fmp12 and GoZyncMobile.fmp12
LowZync, the free version of GoZync only supports syncing a single Table Occurrence and ships with our example QuickContact file already syncing. If you want to sync your file instead you'll need to stop syncing QuickContact or %newwin% [[http://www.seedcode.com/cp-app/ste_cat/gozync#licenses | purchase a GoZync license]]. Here's how to remove QuickContact...
-> First, you may want to make a backup of these files incase you'd like to refer to a copy with QuickContact integrated.
-> Next, visit the dashboard in GoZyncHosted and click the "delete" button in the "QuickContactHosted" row.
-> Now delete the "Contacts" table occurrence from both GoZyncHosted.fmp12 and GoZyncMobile.fmp12
Changed lines 13-14 from:
-> Create one new table occurrence for each row shown in step 5 with a caution icon on it. Do the same in GoZyncMobile, creating a new TO for each row.
to:
-> Create one new table occurrence for each row shown in step 5 with a caution icon on it (see below). Do the same in GoZyncMobile, creating a new TO for each row.
Changed lines 3-6 from:
You may have nothing to do on this tab and arrive to it already with a green checkbox at the top of the screen. In particular, if the layout you chose on the previous screen doesn't have any related fields on it, then there is nothing to do here and you can move on to [[Integration3Of4 | Step 3 of 4]].
But if you do have related fields on your layout, GoZync will pick them up and create additional table occurrence rows for them: each of which needs a table occurrence and a blank layout added to GoZyncHosted (GZH) and to GoZyncMobile (GZM).
But if you do have related fields on your layout, GoZync will pick them up and create additional table occurrence rows for them: each of which needs a table occurrence and a blank layout added to GoZyncHosted (GZH) and to GoZyncMobile (GZM).
to:
You may have nothing to do on this tab and arrive here with a green checkbox already "OK" at the top of the screen. In particular, if the layout you chose on the previous screen doesn't have any related fields on it then there is nothing to do here and you can move on to [[Integration3Of4 | Step 3 of 4]].
But if you do have related fields on your layout, GoZync will pick them up and create additional table occurrence (TO) rows for them: each of which needs a table occurrence and a blank layout added to GoZyncHosted (GZH) and to GoZyncMobile (GZM).
But if you do have related fields on your layout, GoZync will pick them up and create additional table occurrence (TO) rows for them: each of which needs a table occurrence and a blank layout added to GoZyncHosted (GZH) and to GoZyncMobile (GZM).
Changed lines 11-12 from:
-> Repeat instructions from steps 2 and 3 of previous tab.
to:
-> Select File / Manage / Database and select the relationships tab: click the "+" button in the lower right to begin adding a new table occurrence.
-> Create one new table occurrence for each row shown in step 5 with a caution icon on it. Do the same in GoZyncMobile, creating a new TO for each row.
-> Create one new table occurrence for each row shown in step 5 with a caution icon on it. Do the same in GoZyncMobile, creating a new TO for each row.
Changed lines 17-18 from:
-> Transformations kind of start right here.
to:
-> It is perfectly OK to have different table occurrence names on the hosted and mobile sides. You'll see that you can select a TO name on the mobile side, thus selecting one that holds the same data as your hosted table but may have a different name. (You can deal with fields that may have different names between the two tables in a [[FieldMapping | later step]].)
Changed lines 21-22 from:
-> What to do if you see things here but don't want them
to:
-> If you see table occurrences listed here but don't want to include them in the sync, you'll need to remove those related fields from the layout being synced. See "Tips on selecting a layout." from [[Integration1Of4 | the previous integration page]].
Changed lines 1-2 from:
!! Background. Additional Table Occurrences.
to:
!! Background: Additional Table Occurrences.
Changed lines 13-14 from:
''TO Names not the same?''
to:
'''TO Names not the same?'''
Changed lines 29-30 from:
-> And here is what it looks like when you have:
to:
-> In our example the invoice line items related to our invoice are on a table occurrence named "Invoice Data". And here is what it looks like when you have:
Changed lines 27-28 from:
%center% http://www.seedcode.com/rootimages/stikipad/gozync/tableswarning.png
to:
%center% http://www.seedcode.com/rootimages/stikipad/gozync/tableswarning.jpg
Changed lines 31-32 from:
%center% http://www.seedcode.com/rootimages/stikipad/gozync/tablesgreen.png
to:
%center% http://www.seedcode.com/rootimages/stikipad/gozync/tablesgreen.jpg
Changed lines 9-10 from:
'''Select the file you're syncing.'''
to:
'''Create a new table occurrence in GZM and one in GZH.'''
Added lines 13-16:
''TO Names not the same?''
-> Transformations kind of start right here.
-> Transformations kind of start right here.
Deleted lines 20-23:
-> Transformations kind of start right here.
Changed lines 25-26 from:
-> When everything checks out green you can move on to [[Integration3Of4 | Step 3 of 4]].
to:
-> When everything checks out green you can move on to [[Integration3Of4 | Step 3 of 4]]. Here is what this screen may look like when you haven't added the table occurrences or layouts:
%center% http://www.seedcode.com/rootimages/stikipad/gozync/tableswarning.png
-> And here is what it looks like when you have:
%center% http://www.seedcode.com/rootimages/stikipad/gozync/tablesgreen.png
-> When everything checks out green you can click on the "Fields & Scripts" tab moving on to [[Integration3Of4 | Step 3 of 4]]
%center% http://www.seedcode.com/rootimages/stikipad/gozync/tableswarning.png
-> And here is what it looks like when you have:
%center% http://www.seedcode.com/rootimages/stikipad/gozync/tablesgreen.png
-> When everything checks out green you can click on the "Fields & Scripts" tab moving on to [[Integration3Of4 | Step 3 of 4]]
Added lines 17-20:
''TO Names not the same?''
-> Transformations kind of start right here.
-> Transformations kind of start right here.
Changed lines 17-18 from:
!! Scan and Validate
to:
!! Scan and Validate [[#Scan]]
Changed lines 19-20 from:
'''Click "Scan and Validate" at the bottom of the screen to check your work..'''
to:
'''Click "Refresh..." at the bottom of the screen to check your work..'''
Changed lines 17-18 from:
to:
!! Scan and Validate
'''Click "Scan and Validate" at the bottom of the screen to check your work..'''
-> When everything checks out green you can move on to [[Integration3Of4 | Step 3 of 4]].
'''Click "Scan and Validate" at the bottom of the screen to check your work..'''
-> When everything checks out green you can move on to [[Integration3Of4 | Step 3 of 4]].
Changed lines 1-3 from:
[[#TOs]] Step 6: Create additional table occurrences and layouts
to:
!! Background. Additional Table Occurrences.
You may have nothing to do on this tab and arrive to it already with a green checkbox at the top of the screen. In particular, if the layout you chose on the previous screen doesn't have any related fields on it, then there is nothing to do here and you can move on to [[Integration3Of4 | Step 3 of 4]].
But if you do have related fields on your layout, GoZync will pick them up and create additional table occurrence rows for them: each of which needs a table occurrence and a blank layout added to GoZyncHosted (GZH) and to GoZyncMobile (GZM).
!! Step 6: Create additional table occurrences and layouts [[#TOs]]
'''Select the file you're syncing.'''
-> Repeat instructions from steps 2 and 3 of previous tab.
'''Removing related table occurrences.'''
-> What to do if you see things here but don't want them
You may have nothing to do on this tab and arrive to it already with a green checkbox at the top of the screen. In particular, if the layout you chose on the previous screen doesn't have any related fields on it, then there is nothing to do here and you can move on to [[Integration3Of4 | Step 3 of 4]].
But if you do have related fields on your layout, GoZync will pick them up and create additional table occurrence rows for them: each of which needs a table occurrence and a blank layout added to GoZyncHosted (GZH) and to GoZyncMobile (GZM).
!! Step 6: Create additional table occurrences and layouts [[#TOs]]
'''Select the file you're syncing.'''
-> Repeat instructions from steps 2 and 3 of previous tab.
'''Removing related table occurrences.'''
-> What to do if you see things here but don't want them
Added lines 1-3:
Hi again
[[#TOs]] Step 6: Create additional table occurrences and layouts
[[#TOs]] Step 6: Create additional table occurrences and layouts
